Please use this form to request a quote or more information on outdoor air-quality monitors.

Note: Please complete the form to the best of your ability. The more information you can share here, the faster we will be able to process your request.
your name
organization
address (include city and state)
country
e-mail
phone
project name
step 1:
select gases to be monitored 		Each monitor can contain up to six individual gas sensors:
ozone (O3) - 0-150 ppb
ozone (O3) - 0-500 ppb
nitrogen dioxide (NO2) - 0-200 ppb
carbon monoxide (CO) - 0-25 ppm
sulfur dioxide (SO2) - 0-10 ppm
non-methane hydrocarbons - 0-25 ppm
volatile organic compounds (VOCs) - 0-25 ppm
nitrogen oxides
hydrogen sulfide (H2S) - 0-10 ppm
carbon dioxide (CO2) - 0-2000 ppm
step 2:
select other sensors
noise sensors (please describe below)
particle counters - PM 2.5
particle counters - PM 10
particle counters: particulate profiler
particle counters - TSP particle monitor
sonic wind speed and direction sensor
six-parameter weather station (temperature, humidity, wind speed, wind direction, barometric pressure, liquid precipitation)
step 3:
select communications options
standard RS-232 output only
GSM/GPRS modem
cellular IP gateway modem
RF modem
Ethernet LAN
Internet connection (please describe below)
step 4:
select low temperature range
temperatures always 50°F (10°C) or above
temperatures always 0°F (-20°C) or above
temperatures as low as -40°F (-40°C)
step 5:
select high temperature range
temperatures do not exceed 104°F (40°C)
temperatures do not exceed 122°F (50°C)
temperatures may exceed 122°F (50°C)
step 6:
note local weather features
strong rainstorms
blizzards
sandstorms
dust storms
high winds
step 7:
select application type
urban air-quality monitoring
traffic and roadside monitoring
tunnel monitoring
fenceline and perimeter monitoring
forest and park monitoring
mine and quarry
petrochemical refining
power plant
landfill
wastewater treatment plant
school or hospital
research
indoor monitoring
remote site monitoring
OEM integration
other application (please describe below)
step 8:
select enclosure options
standard FRP enclosure
insulated roadside box
high-security steel enclosure
humidity controls required
solar radiation shield required (direct sun protection)
step 9:
stationary or mobile
standard mounting kit with wall-mount brackets
pole mounting kit
custom mounting required (please describe below)
mobile installation
step 10:
power available
100/120 VAC power available
220/240 VAC power available
12 VDC power available
solar power required
uninterruptible power supply (UPS) or battery backup required
step 11:
data management
will use factory-standard data software
will use third-party data management
will use other data-acquisition software or hardware
step 12:
calibration
factory-supplied integrated calibration
factory-supplied portable manual calibration
third-party calibration
step 13:
spare parts
basic spare-parts package
full spare-parts package
service pack
spare modules
step 14:
other 		Anything else we should know about your needs? Any sources of gas interference, for instance? Please note any special security needs or factory paint requirements.
step 15:
submit